Flood Set GE-DP 7535 N LL ECO

The Einhell flood set GE‑DP 7535 N LL is ready for use in just a few simple steps during high water and flooding. The Einhell dirty water pump GE‑DP 7535 N LL is a combination pump that can be used for both clean water and dirty water. One pump performs two tasks: it can flat‑suction down to a residual water level of 1 mm in clean water mode or it can pump dirty water with particle sizes of up to 35 mm. This 2‑in‑1 pump impresses with its high performance: with 750 watts of power, it can pump up to 18,500 litres of water per hour. It can pump water to a maximum delivery height of 9 m. The infinitely adjustable float switch allows you to choose between continuous operation and preset on‑ and off‑levels. The dry‑run protection linked to the float switch ensures that the motor only runs when the dirty water pump is submerged in water, thereby preventing damage to the unit. Pumping can already start at a water depth of 15 mm. The suction level can be quickly adjusted in four stages by a simple twisting motion. With the help of suspension eyes, a rope can be attached to the pump so that it can be lowered easily and in a controlled manner. The robust pump housing made of stainless steel and the high‑quality mechanical seal reliably withstand even demanding drainage tasks and provide a long service life. Thanks to the practical carrying handle, this 2‑in‑1 combination pump is ready for use anywhere, and it is immediately on hand during floods. The Einhell flood set GE‑DP 7535 N LL consists of the 2‑in‑1 dirty water pump with a universal adapter for 25/38 mm and 33.3 mm (1" male thread), a 10 m long fabric hose with three quick couplings, a quick‑connector and a plastic box that prevents clogging from sludge.